Engineering
Favorites|Homepage
Subscriptions | sitemap
HOME > Engineering > Engineering

Engineering

Confusion in flow of electrons in a metal with positive and negative terminal

when a electric potential difference is applied across the metallic wire ,the loosely attached free electrons start moving towards the positive terminal to the cell .this continuous flow of electrons

Why is a high impedance earphone better for a crystal radio

Why is a high impedance earphone better for a crystal radio? thanks-Another way to look at it is that the Crystal set captures very little power and can, therefore, supply very little current.With th

Grade 12 math: vector question

Given |vector a| = 3, |vector b| = 5, and |vector a + vector b| = 7, determine |vector a - vector b|. answer: 4.26 Can somebody please explain how you solve this question? Its too hard for me...-Wh

If you drop an egg off a 1 1/2 story building, how do you get it not to break

I have a school project and we need to put an egg in a milk carton and drop it off our schools clock tower. It has to be in a milk carton, thats the only rule. There can be padding and whatnot too.-fo

I am persuing an Engineering degree and thinking about joining their AFROTC program. Is it to time consuming

It shouldnt be too bad. My roommate this past year is a facilities engineering major (were both seniors doing different engineering degrees), and hes in the marine corp ROTC, in fact this past year he

How do i determine the solar time and then hour angle

i have a house, three metres high, with a window 1m from the ground, and 0.5m from the roof. i need to work out how long the eaves have to be to shade the window in summer (dec 21, noon) and allow the

What is i^65 + i^76

i + 1

Why does an inclined plane have a larger mechanical advantage than a lever

As you can see from the article below, it depends on the specific level or inclined plane as to the specific mechanical advantage. So neither is inherently superior.-It depends on the sizes of the lev

Why are remote controls not used more

Like in lawnmowers, tractors, parking cars and others It seems they are only used in TVs, toys and parked cars (except maybe some industrial applications) Why is this?-While there are devices for indu

Could someone answer this math application problem

A wanderer hikes due east for 2 mi, then southeast for 3 mi, then due north for 6 mi, then southwest for 6 mi. She then notices a storm gathering. How far is she from her starting point?-Approximarely

How to create a powerful electrical charge with a smaller charge and copper wire

Im not sure of the process or machine used to do this, but on the first season of The Colony a device was used to convert a low level of power into a higher level of power, just by putting it through

Geometric sequences/series help please

A savings scheme pays 5% per annum compound interest. A deposit of £100 is invested in this scheme at the start of each year. a) Show that at the start of the third year, after the annual deposit has

How many milliamps is 4mA

I think I have that right.I have a device that has 4-20 mA printed on it.Should I read that as meaningthe device is 0.4amps?-no.... 0.4 amps is 400 milli-amps your device draws just 4 milli-amps norm

Oersted and Amp per meter

I am trying to better understand oersted and amp per meter. I have done some research and from wiki founded 1 oersted = 1000/4π (≈79.5774715) ampere per meter. It then goes on to say, a wound with 79.

Civil Engineering or Architecture

ok, before anybody gets excited, i have done TONS of research. but for some reason i cannot find a decent enough comparison. theyre either too biased or not in depth enough and basically said they are
New
Hot
© 2008-2010 http://www.science-mathematics.com . Program by zplan cms. Theme by wukong .