Im not sure how to solve this question? Any Help to solve this is appreciated
http://media.cheggcdn.com/media/42b/42b12f4d-08dd-44ec-a8b5-eba97ab628fb/phpAGYgn4.png
http://media.cheggcdn.com/media/42b/42b12f4d-08dd-44ec-a8b5-eba97ab628fb/phpAGYgn4.png
-
T=RC the circuit reaches .632 v in one time constant = ~.25uS in series with a 10 K ohm resistor
2.5x10^-7 = 1x10^4* C
2.5x10^-7/1x10^4= ~ 2500uF
Part 2. Remove the voltage source and switch. Use a function generator producing a square wave output of 1 v P-P. The wave form will be an exponential sawtooth.
2.5x10^-7 = 1x10^4* C
2.5x10^-7/1x10^4= ~ 2500uF
Part 2. Remove the voltage source and switch. Use a function generator producing a square wave output of 1 v P-P. The wave form will be an exponential sawtooth.
-
1)
tau = RC
tau of the RC circuit is the time required, in seconds, for the circuit to charge from 0V to 0.632 of full voltage. In this circuit, tau is approx. 0.25 s. Therefore
0.25 = 10000C
C = 0.25 / 10000 = 25 uF
tau = RC
tau of the RC circuit is the time required, in seconds, for the circuit to charge from 0V to 0.632 of full voltage. In this circuit, tau is approx. 0.25 s. Therefore
0.25 = 10000C
C = 0.25 / 10000 = 25 uF