What trace spacing and width I should use in this circuit

[From: ] [author: ] [Date: 11-04-22] [Hit: ]

and what should I use for the DC?-Hope you really meant 0.254 cm not mm for the AC track. 6mm spacing should be OK but 10mm is better safe than sorry. For the 5V 1A track width 0.75cm should be more than adequate with a 2-3mm separation.......

I am makeing a PCB and I want to use 120VAC and .2A on half the circuit, and 5VDC and 1A on the other half. What spacing and width should I use on this circuit? I was thinking a 6mm spacing on the AC traces, and a .254 mm width. On the other half, I am totally lost. Will those AC specs work, and what should I use for the DC?

-

Hope you really meant 0.254 cm not mm for the AC track. 6mm spacing should be OK but 10mm is better safe than sorry. For the 5V 1A track width 0.75cm should be more than adequate with a 2-3mm separation.

-

Spend some time reading this invaluable document:
http://alternatezone.com/electronics...t…

1

keywords: and,use,width,this,trace,should,spacing,in,circuit,What,What trace spacing and width I should use in this circuit

New

Hot